Printer Connection
📱 Platform Support:
- ✅ Android: Works with Chrome browser (Web Bluetooth)
- ✅ Windows: Works best with Serial (COM) - more stable than Bluetooth
- ✅ Mac/Linux: Works with Chrome/Edge (Web Bluetooth)
- 📱 iOS (iPhone/iPad): Web workflow available!
- 🎯 Simple 3-Step Process:
- 1️⃣ Capture or upload your photo in this web app
- 2️⃣ Tap the "Share Photo" button below
- 3️⃣ Select your printer app (Phomemo, PeriPage, Paperang, etc.)
- 💡 First time? Install a printer app from App Store first
- 💾 Bonus: Add this page to Home Screen (Share → Add to Home Screen)
Setup: Turn printer ON, pair it via your device's Bluetooth settings first, then connect here.
⚠️ Still Not Connecting? Click for Solutions
🔧 RECOMMENDED METHOD (Works 99% of the time):
- Make sure printer is ON (paired via Windows Bluetooth settings)
- Click "Connect via Serial (COM)" button above
- Select your VOZY COM port from the list
- If unsure which port: Open Device Manager → Ports (COM & LPT) → find VOZY or Bluetooth Serial
- If garbled output, try different Serial speeds (9600 or 115200)
🔄 If Serial (COM) Fails:
- Turn printer OFF completely (wait 10 seconds)
- Turn printer ON (wait for ready light)
- Check Windows Bluetooth: Settings → Bluetooth → Make sure VOZY is "Connected"
- Refresh this page (F5) and try Serial (COM) again
🔵 Advanced Fix (Re-pair):
- Go to Windows Bluetooth Settings
- Remove VOZY G80 device
- Re-pair the printer (PIN usually 0000 or 1234)
- Refresh page and use Serial (COM)
💡 Tip: Serial (COM) is more reliable than Web Bluetooth on Windows. Keep printer within 10 feet during connection.
Capture Photo
Photo Preview
No photo captured yet
Test printer sends plain ESC/POS text only (printer init + lines + paper feed). You can press it anytime; if you are not connected yet, the app will tell you to connect via Serial (COM) or Bluetooth first. No camera, upload, or preview needed for the test. Print Photo stays disabled until you capture or upload a photo.